Single Layer BOM Felt is made up of single base layer fabric and fiber layer. Base layer is woven from single strand or multistrand heald. Structure is designed base on different paper machine,different press position and different type of paper. Fiber layer consisted of different lap of fiber web and different diameter of fiber.

for PM with general press section,cylinder machine，fourdrinier machine  

Paper machine: 1575、1880、2640、2800、3200、3600                                 
Speed: less than 150m/min
Stock:waste paper pulp
Paper Grade: corrugated paper with density 70~120gsm, tea paperboard with density 240gsm
                        coated manila with density 140~180gsm, testliner 
Feature:
1. working life of 60~90 days
2. good adaptability for PM
3. Good water permeability
4. wear resistance
 

For general press,K type press with super forming

Paper machine:2640、2800、3200、3600、3800
Speed: 180-300m/min
Stock:waste paper pulp

Paper Grade: corrugated paper with density 70-120gsm, tea paperboard with density 240gsm,  KAPPA with density 140 to 180gsm, testliner

Feature:
1. working life of 50-90 days for general press and 90-150 days for super forming
2. good adaptability for PM. Negative pressure for new felt up to more than 0.02mpa
3. Good water permeability
4. preventing pulp penetration and paper dropping
5. Good dehydration
6. good press-resistance
7. wear resistance
 

Applied for press by pick-up suction roll，suction preloading roll and two press by large blind hole nip rolls. And for press by suction lead paper preloading roll and two press by large nip roll

Paper machine: 3600、3800、4000、4400, PM equipped with suction preloading roll and large blind hole nip roll
Speed: 400-500m/min
Stock:waste paper pulp, full recovery pulp
linear pressure: 180-420KN/M
Paper Grade: corrugated paper with density 70~120gsm, KAPPA with density 140 to 180gsm, testliner
 
Feature:
1. working life of 50~70 days
2. 100% imported fiber
3. good adaptability for PM
4. preventing pulp penetration and paper dropping
5. good press-resistance